Valley Fixers
General home repairs in the San Fernando Valley: your to-do list, done in one visit
Every house collects a list: the tub that needs fresh caulk, the drafty front door, the ceiling fan that wobbles, the gate that drags. Describe your list, and we match you with a skilled, vetted local handyman who works through it in one visit. Anything bigger, or anything that needs a permit, goes to a CSLB-licensed contractor from our vetted network instead.
- Most small repairs finished in one visit
- Matched with a skilled, vetted local handyman
- Bigger or permit work goes to a CSLB-licensed contractor from our network
- Clear upfront price ranges before anyone is scheduled
- Serving the San Fernando Valley, Burbank and Glendale
No obligation · Response within 24 hours · Your details are only used to contact you.
- 7+ years of experience
- 300+ completed projects
- Response within 24 hours
- One fixed price upfront
- Vetted local pros
Small repairs have a way of staying on the list for months. Not because they are hard, but because finding someone reliable for a two-hour job is harder than the job itself. Contractors rarely come out for small work, and picking a stranger from an app feels like a gamble.
Valley Fixers exists to solve that first problem: finding the right person. We are a free matching and coordination service for homeowners in the San Fernando Valley, Burbank and Glendale. You describe what needs doing, we check the scope of each item, and we match you with a skilled, vetted local handyman who does this kind of work every week. One point of contact from the first message until the job is done and checked.
California draws a clear legal line for small jobs. Work that stays below the state's small-job threshold for combined labor and materials, and that needs no building permit, may be done by a handyman without a contractor license (Business and Professions Code 7048, updated by AB 2622 in 2025). Caulking, weatherstripping, hardware and most adjustment work sit comfortably inside that line. Anything beyond it goes to a CSLB-licensed contractor from our vetted network, and we tell you which is which before anyone is booked.
The typical request is a list, not a single job: re-caulk the shower, seal the drafty door, swap two light fixtures, re-hang the side gate, quiet down the garage door. Bundled into one visit, that list stops being five errands and becomes one appointment. That is exactly the kind of visit we plan.
What the licensed contractors in our network can do for you
Caulking and sealing
Old, cracked caulk lets water creep behind tile and into walls. Your handyman strips it out, cleans and preps the joint, and lays a clean bead of the right product for the spot: mildew-resistant in tubs and showers, paintable where it shows, exterior-grade around frames and siding gaps.
Weatherstripping and draft sealing
Valley summers and cool winter nights both leak in around doors and windows. Your handyman replaces worn weatherstripping, fits door sweeps and seals gaps, so rooms hold their temperature and the AC does not run against a drafty door.
Light fixture replacement
Swapping an existing fixture for a new one on the same wiring is classic handyman territory. Your handyman removes the old fixture, checks the box and connections, and mounts the new one securely. New circuits, new wiring runs and panel work are electrician jobs, and for those we match you with a licensed pro instead.
Ceiling fan replacement
A wobbling, clicking or dead fan is usually replaced on the existing fan-rated ceiling box. Your handyman confirms the box is rated for a fan, mounts and balances the new one, and tests every speed. If the spot has never held a fan and needs new wiring or bracing, that goes to a licensed electrician.
Gate and fence hardware
Sagging gates that drag, latches that no longer catch, loose hinges and pickets. Your handyman re-hangs the gate, fits an anti-sag kit where needed, replaces tired hardware with exterior-grade parts and gets the latch closing with one hand again.
Minor garage door maintenance
Lubricating rollers and hinges, tightening hardware, aligning the safety sensors and replacing the bottom weather seal keep a garage door quiet and reliable. Torsion springs and cables are under high tension and are not handyman work; for those we coordinate a licensed garage door pro.
Doors, drawers and small adjustments
Sticking interior doors, loose handles and hinges, cabinet doors that will not line up, a wobbly towel bar. Small adjustments that take an experienced hand twenty minutes and would eat your whole Saturday.
One-visit to-do lists
Send the whole list in one message. We check each item, flag anything that needs a licensed pro, and plan the visit so your handyman arrives with the right materials and works through the list in a single appointment.
Does this sound familiar?
Sound familiar? These are the situations behind most of the requests we get.
- Your to-do list has items on it from last year, and it only grows.
- Contractors do not call back for small jobs, and when one does, the minimum charge feels out of proportion.
- You tried an app once and got someone unvetted who left the work half done.
- You are not sure which jobs are fine for a handyman and which legally need a licensed contractor.
- The caulk around the tub is turning dark and you suspect water is getting behind it.
- The house is drafty, rooms will not hold their temperature and the utility bill shows it.
- The side gate drags so badly that everyone has learned to lift it while closing it.
- You could do some of it yourself, but the weekends keep disappearing and the ladder work makes you nervous.
How we solve it
The idea behind our service is simple: small jobs deserve the same clarity as big ones. Here is how that works in practice.
- One request for the whole list: describe every job in one message, and we check the scope of each item so nothing is guessed at on your doorstep.
- A vetted local handyman, matched to the work: skills, work history and reliability checked before you ever meet.
- Honest routing: items that fall outside the handyman exemption, or that need a permit, go to a CSLB-licensed contractor from our vetted network. You hear which is which up front.
- Clear upfront price ranges: you know what a job typically runs before anyone is scheduled, and the exact price is confirmed before work starts.
- One visit where possible: bundled jobs mean one appointment instead of five separate arrangements.
- One point of contact: we coordinate scheduling and follow-up until the work is done and checked.
- Free for homeowners: matching and coordination cost you nothing.
Why choose Valley Fixers
One visit instead of five errands
Bundling is the whole trick with small repairs. One planned visit with the right materials on board clears a list that would otherwise cost you five phone calls and three weekends.
The right pro for each job
Small jobs go to a skilled, vetted local handyman. Anything bigger or permit-bound goes to a CSLB-licensed contractor from our network. You never have to guess where that legal line runs; we check it for you.
Vetted, so you are not gambling
The pro we match you with has been checked on skills, work history and reliability, and keeps getting matched only when real jobs keep going well. Your feedback after the visit counts.
Clear pricing before anyone arrives
You see clear upfront price ranges for common jobs before scheduling, and the exact price is agreed before work starts. No meter running, no surprise on the doorstep.
Small fixes prevent big repairs
Failed caulk becomes water damage, a dragging gate tears out its post, a dry garage door wears out its opener. Handling the small stuff on time is the cheapest maintenance a house gets.
Local to the Valley
The pros we match you with work in the San Fernando Valley, Burbank and Glendale every week. Short drives mean easier scheduling and no travel padding on small jobs.
How we work
1
Tell us about the job
Call us, request a callback or fill in the short form. Describe what needs to be done, snap a photo if that is easier, and we respond within 24 hours. A whole to-do list at once is welcome, that is usually the best value.
2
Get a clear price upfront
You see the typical price range for your job right away, and the pro we match you with confirms one fixed price before any work starts. No surprises when the job is done, the agreed number is the number.
3
Matched with the right vetted pro
Small jobs go to a skilled local handyman from our network. Bigger work, or anything that needs a permit, goes to a CSLB-licensed contractor. We check reviews, experience and past work, so you do not have to.
4
Job done and checked
Your pro shows up on time, most jobs are finished in a single visit, and you check the result together before you pay. We stay your point of contact until everything on the list is crossed off, backed by a workmanship guarantee from your pro.
Materials and finishes
Small jobs still involve real material choices, and the cheap option is often the one you redo next year. Your handyman talks these through with you before or during the visit.
Caulk: silicone, acrylic or hybrid
Wet areas want 100 percent silicone or a quality hybrid: flexible, waterproof and mildew-resistant. Trim and baseboards want paintable acrylic latex. Using the right one per joint is the difference between five years and five months.
Weatherstripping types
Foam tape is cheap but short-lived; V-seal and silicone bulb profiles last far longer on doors that open daily. Door sweeps and garage bottom seals are sized to the actual gap, not guessed.
Light fixtures and ceiling fans
You can supply a fixture you already bought, or your handyman can pick one up for you. Bathrooms and outdoor spots need damp-rated fixtures, and every fan needs a fan-rated ceiling box; both get checked before mounting.
Gate and fence hardware
Exterior-grade, galvanized or stainless hinges and latches survive Valley sun and sprinkler spray. An anti-sag kit costs little and keeps a wide gate square for years.
Garage door consumables
Rollers, hinges and the bottom seal are normal wear parts, maintained with garage-rated lubricant rather than a general-purpose spray. Springs and cables stay off the list: those are specialist work.
What does general home repairs cost?
Small repairs are priced by time, materials and access, not mystery. A tub re-caulk is mostly careful prep and labor. A ceiling fan swap depends on ceiling height and what the existing box turns out to be. A gate re-hang depends on the state of the post. That is why the pros we match you with work with clear upfront price ranges, narrowed to an exact price once the job or your photos have been seen.
You can find typical ranges for common jobs on our handyman prices page, and the price you agree to is set before work starts, not after. Bundling several jobs into one visit usually works in your favor, because the trip and setup are shared across the whole list.
Want a number for your list? Send it in or call (747) 774-7310. You will hear back within 24 hours with a clear range and a proposed visit.
These factors determine the price:
- How many jobs you bundle into one visit
- Time on site, including prep, curing time and cleanup
- Materials needed: caulk, weatherstripping, hardware or a fixture, and who supplies them
- Access and height: second-story windows and high ceilings take longer
- The condition behind the old work, such as damaged trim under failed caulk
- Fixture or fan weight, and whether the existing ceiling box is rated for it
- Whether an item turns out to need a licensed contractor and its own separate quote
Want a real range for your list? See the handyman prices page for typical ranges, or send in your jobs and get a clear upfront range before anything is scheduled.
Leave your phone number for a free feasibility check. No obligation, no pressure.
How long does it take?
Most general repairs are one-visit work. Caulking, weatherstripping, a fixture swap, a gate adjustment: your handyman finishes the list in the same visit, usually within a morning or an afternoon. Fresh caulk needs to cure before a shower is used again, and your handyman times that with you.
Scheduling moves quickly because the jobs are small. You hear from us within 24 hours of your request, and the visit is planned at a time that suits you. If a fixture or a specific part has to be ordered first, that happens before the appointment so the visit is never wasted.
When an item on your list turns out to be bigger than expected, or needs a permit, you hear it immediately. We coordinate a CSLB-licensed contractor from our network for that item, and the rest of the list still gets done as planned.
General Home Repairs in your neighborhood
We guide general home repairs projects across the San Fernando Valley, Burbank & Glendale and match you with the right licensed contractor. Check the page for your neighborhood or get in touch right away.
View all neighborhoods
Don't see your neighborhood? View our full service area or give us a call. If you are in the city of Los Angeles, chances are we cover your area too.
Frequently asked questions about general home repairs
Who actually does the work?
Skilled, vetted local handymen do the small jobs, and CSLB-licensed contractors from our vetted network handle bigger or permit-bound work. Valley Fixers itself is a free matching and coordination service, not a contractor: we check the scope, match you with the right pro and stay your point of contact until the job is done. Your agreement for the work is directly with the pro who performs it.
Is it legal for a handyman to do these jobs?
Yes. California's minor work exemption (Business and Professions Code 7048, updated by AB 2622 in 2025) allows a handyman without a contractor license to do small jobs that stay below the state's combined labor and materials threshold and need no building permit. The jobs on this page typically fall well inside that exemption. When an item does not, we match you with a CSLB-licensed contractor instead and tell you so up front.
What do general home repairs cost?
That depends on time, materials and access, so the pros we match you with work with clear upfront price ranges instead of one-size-fits-all rates. You can see typical ranges for common jobs on our handyman prices page, and your exact price is confirmed before any work starts. Bundling several jobs into one visit usually lowers the cost per job.
Can a handyman replace my light fixture or ceiling fan?
A like-for-like swap on existing wiring is generally normal handyman work: old fixture off, connections checked, new fixture or fan mounted on a properly rated box. New circuits, new wiring runs, panel work or anything that needs a permit is electrician territory, and we match you with a licensed pro for that. Describe the job and we check which side of the line it falls on.
Do you take on garage door repairs?
Minor maintenance, yes: lubrication, tightening hardware, aligning the safety sensors and replacing the bottom weather seal are normal handyman jobs and make a loud door quiet again. Broken torsion springs and cables are under high tension and dangerous, so for those we coordinate a licensed garage door pro instead. Describe the symptom and we route it to the right person.
Can I put several small jobs into one visit?
Please do; that is the whole point of a to-do list visit. Send everything in one message, even the items you think are too small to mention. We check each one, flag anything that needs a licensed contractor, and plan the visit so your handyman arrives with the right materials and clears the list in one appointment.
How fast can someone come out?
You hear from us within 24 hours of your request. Because the jobs are small, most visits can be scheduled within days rather than weeks, and the work itself is usually finished the same visit it starts.
Do I need to buy the materials or fixtures myself?
Either way works. Standard supplies like caulk, weatherstripping and hardware usually come with your handyman. For fixtures and fans, many homeowners pick their own so the style is right, and your handyman can also pick one up for you. Who supplies what is agreed before the visit, so there are no surprises on the day.
How are the pros vetted?
Before we match anyone, we check skills, work history and reliability, and for contractor-level work we verify the CSLB license status. Pros stay in the network based on how real jobs go, and we ask for your feedback after every visit. Someone who cuts corners does not get matched again.
Which areas do you serve?
We match homeowners across the San Fernando Valley, Burbank and Glendale. Because the pros already work in these neighborhoods every week, small jobs stay easy to schedule and there is no long-distance travel built into the price.
Do I need to be home during the visit?
At the start, yes. Walking the list together for a few minutes prevents wrong guesses, and decisions like caulk color or fixture placement are easier in person. After that, many homeowners get on with their day and do a quick final check when the work is done.
What happens after I send in my list?
You hear from us within 24 hours. We go through your list, tell you which items are handyman work and which need a licensed contractor, and give you a clear upfront price range. Then we match you with a vetted local pro and plan the visit. Prefer to talk it through right away? Call (747) 774-7310.
Is your question not listed? Call us at (747) 774-7310, we are happy to answer it personally.
Often combined with
Drywall Repair
A hole in the wall never fixes itself, and a bad patch is visible for years. Describe the damage, and we match you with a skilled, vetted local handyman who patches it, matches your texture and leaves the wall paint-ready. Most repairs are finished in a single visit.
Faucet & Fixture Repair
A dripping faucet keeps you up at night and quietly runs up your water bill. Describe the problem, and we match you with a skilled, vetted local handyman who shows up with the right parts and gets it fixed, usually in a single visit. If the job turns out to be bigger than a fixture, we match you with a CSLB-licensed plumbing contractor from our vetted network instead.
TV Mounting & Hanging
A new TV in the box, a mirror leaning against the wall, shelves still in the trunk. Describe the job and we match you with a skilled, vetted local handyman who mounts it level, secure and with the cables out of sight. Most jobs are finished in a single visit, often the same day.
Get the small stuff off your list. Call Valley Fixers at (747) 774-7310 or send in your to-do list; you will hear from us within 24 hours.
Fill out the form and get a response within 24 hours, with no obligation. Rather talk it through right away? Call (747) 774-7310.